NC 160T Press Brake Machine For Bending
| Weight | 950 kg |
|---|---|
| Dimensions | 3200 × 2000 × 2500 mm |
| Capacity |
160T |
| Bending Length |
2500mm |
| Backgauge Axis |
X+R |
| Controller |
HS-15T |
| Brand |
HARSLE |
| Price Term |
EXW |
| Lead Time |
30 Days |
| Payment Method |
LC ,T/T |
| Warranty |
Three Years |
10 in stock
NC 160T Press Brake Standard Press Brake has high labor productivity and high working accuracy for bending metal sheets.
It adopts different shapes of upper and lower molds and can be bent into various shapes of workpieces.
Standard Press Brake can bend sheet once by one stroke of the slider. , After many times of bending, the workpiece with a more complicated shape can be obtained.
When equipped with corresponding equipment, it can also be used for punching.
NC 160T Press Brake Working slide structure
1. The machine adopts hydraulic and electrical control, the stroke of the slider can adjust arbitrarily and has the action specifications of inching, semi-automatic, automatic, etc., and the inching specification can use for easy mold trial and adjustment.
2. The design of the upper-moving bending machine, the two cylinders work at the same time, the operation balance, convenient and safe.
3. There is a pressure-holding delay function at the bottom dead center to ensure the accuracy of the workpiece.
4. Under the relevant national standard conditions, the bending angle accuracy can reach ±45´. (Quoted standard JB/T22572-2011)
5. With the function of slow descent control, the operator can better control the workpiece.
NC 160T Press Brake Hydraulic system
1. The hydraulic system (Germany Bosch Rexroth) can realize the slide block’s rapid decline, slow decline, working speed bending, rapid return, and upward and downward motions such as sudden stop of the slide block.
2. The oil pump adopts a (USA SUNNY) gear pump, which can withstand high pressure and low noise.
3. The oil pipeline uses a combination of German ferrule joints and galvanized cold-drawn pipes, eliminating the need to replace the sealing ring to overcome oil leakage.
4. The sealing ring is selected from Japan’s NOK company, which has good sealing performance, reliable work, and long life.
5. The machine tool can work continuously under rated load, the hydraulic system has no leakage, and is continuously stable, with high precision.
NC 160T Press Brake Main features
The whole welded machine structure achieves high rigidity; the machine designed by ANSYS software can ensure the reliability and precision of the press brake.
The motors for Back-gauge and ram stroke are controlled by an inverter, which can achieve a high positioning accuracy of the Back-gauge and ram by changing the frequency and voltage of the motor.
The X-axis (Back-gauge) and Y-axis (Ram stroke or cylinder stroke) can be programmed by the controller, which can make the bending job easy.
The side and rear metal safety guard meet the European safety standard.
Hydraulic overload can be protected by an overflow valve, System pressure can be regulated by a pressure switch easily.
A footswitch with an emergency button can stop the machine immediately when an accident happens.
NC 160T Press Brake safety standard
EN 12622:2009+A1:2013/ EN ISO 12100:2010 / EN 60204-1:2006+A1:2009
Open door power off the device (inclusive)
South Korean KACON footswitch(inclusive)
Side and rear metal safe fences(inclusive)
Photoelectric protection (optional)
Hydraulic overload protection(inclusive)
HS-15T Controller
10 reviews for NC 160T Press Brake Machine For Bending
Clear filtersWhy Choose HARSLE?
HARSLE is a professional metalworking machine manufacturer in China for many years, our productions have been sold to over 100 countries in the world!
Jose Francisco Leonel –
The press brake machine is easy to operate and allows me to create intricate designs with precision and accuracy.
Ahmed Mohamed Elbrbry –
The level of precision is outstanding, and I can achieve my desired results with minimal effort.
Mathias Porgo –
This bending machine is a must-have for those who work with metal sheets and want to create custom shapes with accuracy.
Tommy Tshivuadi –
I would highly recommend this press brake machine to anyone looking to streamline their metalworking process and create high-quality workpieces.
Nicolae Todericiu –
As someone who works in the metal fabrication industry, I can confidently say that the press brake machine is a game-changer!
Mlungisi Zulu –
This bending machine has made the process of bending metal sheets and creating complex shapes so much easier and efficient.
Gabriel Ivan –
The bending machine is easy to operate and has a wide range of capabilities, which allows me to create a variety of geometric cross-section shapes of the workpiece.
Stephen otieno obewo –
The quality of the bends is precise and accurate, which is critical in our industry.
Daniel Santos Queiroz –
I highly recommend this machine to anyone who is looking to increase their productivity and improve the quality of their work.
Edouard Tueche –
I have been using the press brake machine for a few months now and I must say that it has been a game-changer for my metalworking projects.