{"id":15072,"date":"2021-10-19T03:13:43","date_gmt":"2021-10-19T03:13:43","guid":{"rendered":"https:\/\/zawiiw746w.wpdns.site\/?p=15072"},"modified":"2021-10-19T03:46:57","modified_gmt":"2021-10-19T03:46:57","slug":"how-to-improve-working-efficiency-of-cnc-bending-machine","status":"publish","type":"post","link":"https:\/\/www.scoson.com\/ar\/how-to-improve-working-efficiency-of-cnc-bending-machine\/","title":{"rendered":"\u0643\u064a\u0641\u064a\u0629 \u062a\u062d\u0633\u064a\u0646 \u0643\u0641\u0627\u0621\u0629 \u0627\u0644\u0639\u0645\u0644 \u0644\u0622\u0644\u0629 \u0627\u0644\u062b\u0646\u064a CNC"},"content":{"rendered":"\n

The CNC bending machine<\/a> is a kind of equipment product that is specially responsible for the completion of material bending operations. When users usually use CNC bending equipment, they can set the parameters first, and then feed the materials into the equipment to quickly complete the processing tasks. In the CNC machining process, the machining route does follow the following principles. The purpose of the machining route is to ensure the accuracy and roughness of the parts, and the efficiency is relatively high. This not only reduces the workload but also reduces the program. In the process of using the CNC equipment, the CNC machine tool is slowly moving towards the mature stage. Below, HARSLE will explain to you how to make CNC machine tools perform well.<\/p>\n\n\n\n

\"press
CNC Press Brake Machine<\/figcaption><\/figure><\/div>\n\n\n\n
  1. Since the CNC bending machine is fixed, the CNC equipment is more complicated and the grades are different, which brings great difficulties to the staff and the technical ladyboys.<\/li>
  2. Numerical control personnel come from different machining processes and have different cultures. They have not found a good idea in the numerical control equipment. The quality of the processing procedure determines the quality of an operator, and the work efficiency of the CNC machine tool cannot be maximized.<\/li>
  3. The program is unfamiliar in the process of parts processing, and the CNC machine tools cannot be processed scientifically, and the CNC equipment has not been properly managed in time. As a result, the efficiency of CNC machine tools cannot be fully utilized.<\/li>
  4. The memory of general CNC machine tools is not too large. In the process of processing, the more types of parts, many processing programs cannot be stored, and a limited system cannot store a complex part for processing. Continuous repetition wastes a lot of time for parts work, which directly affects the efficiency of CNC work. Under the condition of machine load, the adjustment parameters of various machines cannot reach the qualification coefficient of parts, which can reduce a lot of time in the production process. Only by improving the details of the task can it work well.<\/li><\/ol>\n\n\n\n

    What is the reason for the long pause time of the slider conversion of the CNC bending machine?<\/strong><\/p>\n\n\n\n

    1. The upper cavity of the oil cylinder sucks in air, and the pressure builds up for a long time.<\/li>
    2. The flow rate of the filling valve or self-priming pipeline is small, or the sliding speed is too fast, resulting in vacuum suction.<\/li>
    3. The filling valve is not completely closed, and the pressure in the upper cavity slows down.<\/li>
    4. After the slow-down valve is energized, close the filling valve and the upper cavity cannot suck oil.<\/li>
    5. The wrong position of the proportional valve leads to different openings and out of synchronization.<\/li>
    6. Decrease the fast down speed and check whether the test stops.<\/li>
    7. The size of the fast down pressure has an effect on the closing of the filling valve, and the fast down pressure is eliminated.<\/li>
    8. Adjust the pressure parameters in the delay stage before work advancement.<\/li>
    9. The damping hole of the control pipe of the filling valve is too small, forming a pressure difference.<\/li>
    10. CNC system parameters, delay before slow down.<\/li>
    11. CNC system parameters, slow down gain parameters decrease.<\/li><\/ol>\n\n\n\n
      \"\"
      Hydraulic Valve<\/figcaption><\/figure><\/div>\n\n\n\n

      How to improve the processing speed of the CNC bending machine?<\/strong><\/p>\n\n\n\n

      In order to effectively increase the processing speed, the equipment is also equipped with many programming functions, so that the equipment can complete the processing operations of many kinds of workpieces at one time while it is running, and achieve higher production efficiency. The user can also adjust the equipment parameters according to the actual production requirements so that the hydraulic system of the equipment is in a stable state, and the processing quality of the material meets the standard. The following is a detailed introduction:<\/p>\n\n\n\n

      \"CNC
      CNC Press Brake Tooling<\/figcaption><\/figure><\/div>\n\n\n\n
      1. When installing and using metal materials, it is necessary to meet certain installation standards, so that the materials need to be processed according to operating requirements, and the accuracy of processing also has a great impact on the installation and use of materials. The CNC bending machine is a kind of equipment product that is specifically responsible for completing the material bending operation. When using the CNC bending equipment, the user can set the parameters first, and then feed the material into the equipment to quickly complete the processing task.<\/li>
      2. When using a CNC bending machine, the system also comes with an angle compensation function, which can avoid errors in the processing process, and can greatly improve the processing accuracy. When using CNC bending equipment, the staff should strictly abide by the processing specifications to complete the operation. They should also wear designated clothing and protective tools to allow the processing operations to be completed under safe conditions.<\/li>
      3. When installing and using the CNC bending machine, check whether the wiring of some equipment is firm and whether the various devices can maintain a coordinated operation state. These checks should be done every day before using the equipment to ensure that the materials are accurate The processing effect.<\/li><\/ol>\n\n\n\n

        The above is the answer to the two questions of “What is the reason for the long pause time of the slider conversion of the CNC bending machine” and “How to improve the processing speed”. If you encounter the same situation, you can refer to the above content to solve it. The video shows DA66T high-efficiency CNC bending machine:<\/p>\n\n\n\n

        \n