{"id":14940,"date":"2021-10-12T08:00:18","date_gmt":"2021-10-12T08:00:18","guid":{"rendered":"https:\/\/zawiiw746w.wpdns.site\/?p=14940"},"modified":"2021-10-12T08:24:38","modified_gmt":"2021-10-12T08:24:38","slug":"how-to-choose-the-hydraulic-press-brake","status":"publish","type":"post","link":"https:\/\/www.scoson.com\/es\/how-to-choose-the-hydraulic-press-brake\/","title":{"rendered":"C\u00f3mo elegir la plegadora hidr\u00e1ulica"},"content":{"rendered":"\n

The hydraulic press brake feature is different in its processing field and process, so it is used as a comprehensive consideration when buying the hydraulic press brake as a purchaser.<\/p>\n\n\n\n

\"DA66T
DA66T CNC Press Brake<\/figcaption><\/figure><\/div>\n\n\n\n

It is best to carefully consider which model to buy in terms of the end-use of the machine, the amount of deflection<\/a> that may occur in the known machine, and the bending radius of the part. Of course, as a decision-maker, you have the responsibility to understand the equipment’s performance, processing range, processing function, processing accuracy, etc. in detail. This responsibility is actually no small matter. Once you choose an improper choice, your production cost will rise, and the hydraulic press brake cannot expect to recover the cost. Therefore, there are several factors that must be weighed when purchasing!<\/p>\n\n\n\n

\"DA41T
DA41T Press Brake<\/figcaption><\/figure><\/div>\n\n\n\n

Workpiece<\/h3>\n\n\n\n

The first important thing to consider is the parts you want to produce. The point is to buy a machine that can complete the processing task with the shortest workbench and the smallest tonnage.<\/p>\n\n\n\n

Carefully consider the material grade and the maximum processing thickness and length. If most of the products produced are mild steel with a thickness of 3mm and a maximum length of 2500mm, then the free bending force does not need to be greater than 80 tons. However, if you are engaged in a large number of bottomed die forming, perhaps you should consider a machine tool of about 150 tonnages.<\/p>\n\n\n\n

\"Bending
Bending Workpieces<\/figcaption><\/figure><\/div>\n\n\n\n

If the thickest material to be bent in production is 6mm, and the length of 2500mm is free to bend low-carbon steel, then it is necessary to consider the need for a bending machine of more than 100 tons.<\/p>\n\n\n\n

If you bend some with a bottom concave die (correction bending), then a larger tonnage bending machine is needed. If most of the workpieces to be bent are 1250mm or shorter, then considering that the tonnage of the bending machine is almost halved, thereby greatly reducing the purchase cost. Therefore, the length of the processed parts is very important to determine the specifications and models of the new models.<\/p>\n\n\n\n

Torsion<\/h3>\n\n\n\n

In the bending process of the bending machine, especially when bending long-size workpieces, the bending will occur. The longer the workpiece, the greater the degree of deflection. Under the same load, the deflection of the 2500mm model table and the slider is 4 times that of the 1250mm model.<\/p>\n\n\n\n

This means that a shorter machine requires fewer shim adjustments to produce qualified parts, reducing shim adjustments and shortening preparation time. However, the current numerical control hydraulic bending machine has added hydraulic deflection compensation function in the production design, which reduces the adjustment of the equipment by the production operator, and at the same time improves the bending accuracy and production efficiency. <\/p>\n\n\n\n

\n