100T Hydraulic Bending Machine has high labor productivity and high working accuracy for 100T Hydraulic Bending Machine.
It adopts different shapes of upper and lower molds, and can be bent into various shapes of workpieces.
100T Hydraulic Bending Machine can bend sheet once by one stroke of the slider. After many times of bending, the workpiece with more complicated shape can be obtained.
When equipped with corresponding equipment, it can also be used for punching.
100T Hydraulic Bending Machine Working slide structure
1. The machine adopts hydraulic and electrical control, the stroke of the slider can adjust arbitrarily and has the action specifications of inching, semi-automatic, automatic, etc,
and the inching specification can use for easy mold trial and adjustment.
2. The design of the upper-moving bending machine, the two cylinders work at the same time, the operation balance, convenient and safe.
3. There is a pressure-holding delay function at the bottom dead center to ensure the accuracy of the workpiece.
4. Under the relevant national standard conditions, the bending angle accuracy can reach ±45´. (Quoted standard JB/T22572-2011)
5. With the function of slow descent control, the operator can better control the workpiece.
100T Hydraulic Bending Machine Hydraulic system
1. The hydraulic system (Germany Bosch Rexroth) can realize the slide block rapid decline, slow decline,
working speed bending, rapid return and upward and downward motions such as sudden stop of the slide block.
2. The oil pump adopts (USA SUNNY) gear pump, which can withstand high pressure and low noise.
3. The oil pipeline uses a combination of German ferrule joints and galvanized cold-drawn pipes, eliminating the need to replace the sealing ring to overcome oil leakage.
4. The sealing ring is selected from Japan’s NOK company, which has good sealing performance, reliable work and long life.
5. The machine tool can work continuously under rated load, the hydraulic system has no leakage and is continuously stable, with high precision.
100T Hydraulic Bending Machine Main features
The whole welded machine structure achieves high rigidity; the machine design by ANSYS software which can ensure the reliability and precision of the press brake.
The motors for Back-gauge and ram stroke are controlled by inverter, which can achieve high positioning accuracy of the Back-gauge and ram by changing the frequency and voltage of motor.
X axis (Back-gauge) and Y axis (Ram stroke or cylinder stroke) can be programmed by the controller, which can make the bending job easy.
Side and rear metal safety guard meets European safety standard.
Hydraulic overload can be protected by overflow valve, System pressure can be regulated by pressure switch easily.
Foot switch with emergency button can stop the machine immediately when accident happens.
100T Hydraulic Bending Machine safety standard
EN 12622:2009+A1:2013/ EN ISO 12100:2010 / EN 60204-1:2006+A1:2009
Open door power off device (inclusive)
South Korean KACON foot switch (inclusive)
Side and rear metal safe fences (inclusive)
Photoelectric protection (optional)
Hydraulic overload protection (inclusive)
doctor mogwasa –
This bending machine is built to last and is able to be used for all types of metal.
Warlem Souza –
A CNC press brake is a machine used to bend metal sheet into various shapes and is essential for metal working.
Antonio Cabral –
It is a very high-quality machine and the staff is also very professional and knowledgeable.
Dorgival Marques –
I love that I can use the press brake to create smaller, lower-cost designs, and then use the press brake to create a large quantity of the same design.
jose Paulino primaz –
This is a great press brake machine for any metal worker.
Bruce galfuh –
It takes a lot of force to bend metal, and this tool will make that process a lot easier and more efficient.
Rostom Seba –
This tool is also worth the investment because it can be used for different projects and it will last a long time.
Taoufik Ben Yamina Boukhalfa –
This is the perfect tool for my business. I have a small business and needed a press brake for bending metal.
Seemole David Letwaba –
I was able to find the perfect press brake for my needs and I am so happy with it.
marsel –
This press brake is very easy to use, compact and powerful.