Press Brake for Metal Working Sheet Bending Machine
Poids | 950 kg |
---|---|
Dimensions | 3200 × 2000 × 2500 millimètre |
Capacity |
80T |
Bending Length |
2500mm |
Backgauge Axis |
X |
Controller |
HS-15T |
Brand |
HARSLE |
Price Term |
EXW |
Lead Time |
30 Days |
Payment Method |
LC ,T/T |
Warranty |
Three Years |
10 en stock
Press Brake for Metal Working has high labor productivity and high working accuracy for bending metal sheets.
It adopts different shapes of upper and lower molds and can be bent into various shapes of workpieces.
2500 mm Press Brake for Metal Working can bend sheet once by one stroke of the slider. , After many times of bending, the workpiece with a more complicated shape can be obtained.
When equipped with corresponding equipment, it can also be used for punching.
Working slide structure
1. The machine adopts hydraulic and electrical control, the stroke of the slider can adjust arbitrarily and has the action specifications of inching, semi-automatic, automatic, etc., and the inching specification can use for easy mold trial and adjustment.
2. The design of the upper-moving bending machine, the two cylinders work at the same time, the operation balance, convenient and safe.
3. There is a pressure-holding delay function at the bottom dead center to ensure the accuracy of the workpiece.
4. Under the relevant national standard conditions, the bending angle accuracy can reach ±45´. (Quoted standard JB/T22572-2011)
5. With the function of slow descent control, the operator can better control the workpiece.
Press Brake for Metal Working Hydraulic system
1. The hydraulic system (Germany Bosch Rexroth) can realize the slide block’s rapid decline, slow decline, working speed bending, rapid return, and upward and downward motions such as sudden stop of the slide block.
2. The oil pump adopts a (USA SUNNY) gear pump, which can withstand high pressure and low noise.
3. The oil pipeline uses a combination of German ferrule joints and galvanized cold-drawn pipes, eliminating the need to replace the sealing ring to overcome oil leakage.
4. The sealing ring is selected from Japan’s NOK company, which has good sealing performance, reliable work, and long life.
5. The machine tool can work continuously under rated load, the hydraulic system has no leakage, and is continuously stable, with high precision.
Press Brake for Metal Working Main features
The whole welded machine structure achieves high rigidity; the machine designed by ANSYS software can ensure the reliability and precision of the press brake.
The motors for Back-gauge and ram stroke are controlled by an inverter, which can achieve a high positioning accuracy of the Back-gauge and ram by changing the frequency and voltage of the motor.
The X-axis (Back-gauge) and Y-axis (Ram stroke or cylinder stroke) can be programmed by the controller, which can make the bending job easy.
The side and rear metal safety guard meet the European safety standard.
Hydraulic overload can be protected by an overflow valve, System pressure can be regulated by a pressure switch easily.
A footswitch with an emergency button can stop the machine immediately when an accident happens.
Press Brake for Metal Working safety standard
EN 12622:2009+A1:2013/ EN ISO 12100:2010 / EN 60204-1:2006+A1:2009
Open door power off the device (inclusive)
South Korean KACON footswitch(inclusive)
Side and rear metal safe fences(inclusive)
Photoelectric protection (optional)
Hydraulic overload protection(inclusive)
Press Brake for Metal Working HS-15T Controller
10 avis pour Press Brake for Metal Working Sheet Bending Machine
Vue grille %sWhy Choose HARSLE?
HARSLE is a professional metalworking machine manufacturer in China for many years, our productions have been sold to over 100 countries in the world!
Anadson Nascimento dos Santos –
It is incredibly efficient and makes bending metal sheets into a variety of geometric shapes a breeze.
Sibusiso Lemmy Mabanga –
I recently invested in a press brake machine for my metalworking business and it has been a game-changer.
Nonyane Davis Tjebane –
I recently purchased a press brake machine for my workshop and it has been a game-changer.
Leroux Venter –
This machine is incredibly versatile and can bend metal sheets into a variety of cross-section shapes with ease.
Abubakar Bala Gummi –
It has saved me both time and money because I no longer need to spend hours manually bending metal sheets.
Justice Maginya –
The machine is also easy to use, and the results are always consistent.
Marcio Freitas –
This press brake machine is a must-have for any workshop that works with metal sheets.
Roberto Diaz Aguilar –
It is a reliable and efficient tool that has increased my productivity while ensuring high-quality results.
Paulo Fernando –
I recently purchased a press brake machine for my metalworking business, and I couldn’t be happier with it.
Josemamuel Rubio –
The machine is incredibly versatile and can bend metal sheets into a variety of different shapes and sizes.