Steel Plate 3200mm Press Brake has high labor productivity and high working accuracy for bending metal sheets.
It adopts different shapes of upper and lower molds and can be bent into various shapes of workpieces.
Steel Plate 3200mm Press Brake can bend sheet once by one stroke of the slider. , After many times of bending, a workpiece with a more complicated shape can be obtained.
When equipped with corresponding equipment, it can also be used for punching.
Steel Plate 3200mm Press Brake Working slide structure
1. The 3200mm bending machine adopts hydraulic and electrical control, the stroke of the slider can adjust arbitrarily and has the action specifications of inching, semi-automatic, automatic, etc., and the inching specification can use for easy mold trial and adjustment.
2. The design of the upper-moving bending machine, the two cylinders work at the same time, the operation is balance, is convenient and safe.
3. There is a pressure-holding delay function at the bottom dead center to ensure the accuracy of the workpiece.
4. Under the relevant national standard conditions, the bending angle accuracy can reach ±45´. (Quoted standard JB/T22572-2011)
5. With the function of slow descent control, the operator can better control the workpiece.
Steel Plate 3200mm Press Brake Hydraulic system
1. The hydraulic system (Germany Bosch Rexroth) can realize the slide block rapid decline, slow decline, working speed bending, rapid return and upward and downward motions such as sudden stop of the slide block.
2. The oil pump adopts (USA SUNNY) gear pump, which can withstand high pressure and low noise.
3. The oil pipeline uses a combination of German ferrule joints and galvanized cold drawn pipes, eliminating the need to replace the sealing ring to overcome oil leakage. Steel Plate 3200mm Press Brake
4. The sealing ring is selected from Japan’s NOK company, which has good sealing performance, reliable work and long life.
5. The machine tool can work continuously under rated load, the hydraulic system has no leakage and is continuously stable, with high precision.
Steel Plate 3200mm Press Brake Main features
The whole welded machine structure achieves high rigidity; the machine design by ANSYS software which can ensure the reliability and precision of the press brake.
The motors for Back-gauge and ram stroke are controlled by inverter, which can achieve high positioning accuracy of the Back-gauge and ram by changing the frequency and voltage of motor.
X axis (Back-gauge) and Y axis (Ram stroke or cylinder stroke) can be programmed by the controller, which can make the bending job easy.
Side and rear metal safety guard meets European safety standard.
Hydraulic overload can be protected by overflow valve, System pressure can be regulated by pressure switch easily.
Foot switch with emergency button can stop the machine immediately when accident happens.
Steel Plate 3200mm Press Brake Machine safety standard
EN 12622:2009+A1:2013/ EN ISO 12100:2010 / EN 60204-1:2006+A1:2009
Open door power off device (inclusive)
South Korean KACON foot switch(inclusive)
Side and rear metal safe fences(inclusive)
Photoelectric protection (optional) Steel Plate 3200mm Press Brake
Hydraulic overload protection(inclusive)
Steel Plate 3200mm Press Brake E200P controller
HD LCD Display Steel Plate 3200mm Press Brake
Multi-step programming
Bending Angle programming
X, Y axis servo motor control
Self-diagnose and real-time alarm
One key parameter backup
Avis
Vue grille %sIl n’y a pas encore d’avis.