{"id":19669,"date":"2023-03-16T07:50:30","date_gmt":"2023-03-16T07:50:30","guid":{"rendered":"https:\/\/zawiiw746w.wpdns.site\/?post_type=product&p=19669"},"modified":"2024-10-06T15:20:22","modified_gmt":"2024-10-06T15:20:22","slug":"125t-nc-bending-machine-e21-3200mm","status":"publish","type":"product","link":"https:\/\/www.scoson.com\/it\/prodotto\/125t-nc-bending-machine-e21-3200mm\/","title":{"rendered":"125T NC Bending Machine E21 3200mm"},"content":{"rendered":"

125T NC Bending Machine<\/a> has high labor productivity and high working accuracy for bending metal sheets<\/a>.<\/p>\n

125T NC Bending Machine\u00a0adopts different shapes of upper and lower molds and can be bent into various shapes of workpieces.<\/p>\n

The 125T NC Bending Machine can bend the sheet once by one stroke of the slider. , After many times of bending,<\/p>\n

the workpiece with a more complicated shape can be obtained.<\/p>\n

When equipped with corresponding equipment, it can also be used for punching.<\/p>\n

Working slide structure<\/h4>\n

1. The machine adopts hydraulic and electrical control, the stroke of the slider can adjust arbitrarily and has the action specifications of inching,<\/p>\n

semi-automatic, automatic, etc., and the inching specification can use for easy mold trial and adjustment.<\/p>\n

2. The design of the upper-moving bending machine, the two cylinders work at the same time, the operation balance, convenient and safe.<\/p>\n

3. There is a pressure-holding delay function at the bottom dead center to ensure the accuracy of the workpiece.<\/p>\n

4. Under the relevant national standard conditions, the bending angle accuracy can reach \u00b145\u00b4. (Quoted standard JB\/T22572-2011)<\/p>\n

5. With the function of slow descent control, the operator can better control the workpiece.<\/p>\n

E21 NC Hydraulic system<\/h4>\n

1. The hydraulic system (Germany Bosch Rexroth) can realize the slide block’s rapid decline, slow decline, working speed bending,<\/p>\n

rapid return, and upward and downward motions such as sudden stop of the slide block.<\/p>\n

2. The oil pump adopts a (USA SUNNY) gear pump, which can withstand high pressure and low noise.<\/p>\n

3. The oil pipeline uses a combination of German ferrule joints and galvanized cold-drawn pipes, eliminating the need to replace the sealing ring to overcome oil leakage.<\/p>\n

4. The sealing ring is selected from Japan’s NOK company, which has good sealing performance, reliable work, and long life.<\/p>\n

5. The machine tool can work continuously under rated load, the hydraulic system has no leakage, and is continuously stable, with high precision.<\/p>\n

\"125T<\/p>\n

125T NC Bending Machine Main features<\/h4>\n

The whole welded machine structure achieves high rigidity; the machine is designed by ANSYS software which can ensure the reliability and precision of<\/p>\n

the press brake.<\/p>\n

The motors for Back-gauge and ram stroke are controlled by an inverter, which can achieve a high positioning accuracy of the<\/p>\n

Back-gauge and ram by changing the frequency and voltage of the motor.<\/p>\n

The X-axis (Back-gauge) and Y-axis (Ram stroke or cylinder stroke) can be programmed by the controller, which can make the bending job<\/a> easy.<\/p>\n

The side and rear metal safety guard meet the European safety standards.<\/p>\n

Hydraulic overload can be protected by an overflow valve, System pressure can be regulated by a pressure switch easily.<\/p>\n

A footswitch with an emergency button can stop the machine immediately when an accident happens.<\/p>\n

\"PRESS<\/p>\n

125T NC Bending Machine safety standard and optional configuration<\/h4>\n

EN 12622:2009+A1:2013\/ EN ISO 12100:2010 \/ EN 60204-1:2006+A1:2009
\nOpen door power off the device (inclusive)
\nSouth Korean KACON footswitch(inclusive)
\nSide and rear metal safe fences(inclusive)
\nPhotoelectric protection (optional)
\nHydraulic overload protection(inclusive) 125T NC Bending Machine<\/p>\n

\"sheet<\/p>\n

 <\/p>\n

<\/h4>\n

 <\/p>","protected":false},"excerpt":{"rendered":"

125T NC Bending Machine has high labor productivity and high working accuracy for bending metal sheets. 125T NC Bending Machine\u00a0adopts<\/p>","protected":false},"featured_media":19660,"comment_status":"open","ping_status":"closed","template":"","meta":{"jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2}},"product_brand":[],"product_cat":[74],"product_tag":[1877,1040,776],"class_list":["post-19669","product","type-product","status-publish","has-post-thumbnail","product_cat-econom-press-brake","product_tag-63t-2000-press-bending-machine","product_tag-e21-press-brake","product_tag-nc-press-brake","product_shipping_class-free-shipping","first","instock","taxable","shipping-taxable","purchasable","product-type-simple"],"jetpack_publicize_connections":[],"_links":{"self":[{"href":"https:\/\/www.scoson.com\/it\/wp-json\/wp\/v2\/product\/19669","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.scoson.com\/it\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.scoson.com\/it\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/www.scoson.com\/it\/wp-json\/wp\/v2\/comments?post=19669"}],"version-history":[{"count":0,"href":"https:\/\/www.scoson.com\/it\/wp-json\/wp\/v2\/product\/19669\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.scoson.com\/it\/wp-json\/wp\/v2\/media\/19660"}],"wp:attachment":[{"href":"https:\/\/www.scoson.com\/it\/wp-json\/wp\/v2\/media?parent=19669"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.scoson.com\/it\/wp-json\/wp\/v2\/product_brand?post=19669"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.scoson.com\/it\/wp-json\/wp\/v2\/product_cat?post=19669"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.scoson.com\/it\/wp-json\/wp\/v2\/product_tag?post=19669"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}