125T NC Bending Machine E21 3200mm

(10 opinii klienta)

Waga 950 kg
Wymiary 3200 × 2000 × 2500 mm
Capacity

125T

Bending Length

3200mm

Backgauge Axis

X

Controller

E21

Brand

HARSLE

Price Term

EXW

Lead Time

30 Days

Payment Method

LC

,

T/T

Warranty

Three Years

9 w magazynie

49 Ludzie oglądają teraz ten produkt!
Opis

125T NC Bending Machine has high labor productivity and high working accuracy for bending metal sheets.

125T NC Bending Machine adopts different shapes of upper and lower molds and can be bent into various shapes of workpieces.

The 125T NC Bending Machine can bend the sheet once by one stroke of the slider. , After many times of bending,

the workpiece with a more complicated shape can be obtained.

When equipped with corresponding equipment, it can also be used for punching.

Working slide structure

1. The machine adopts hydraulic and electrical control, the stroke of the slider can adjust arbitrarily and has the action specifications of inching,

semi-automatic, automatic, etc., and the inching specification can use for easy mold trial and adjustment.

2. The design of the upper-moving bending machine, the two cylinders work at the same time, the operation balance, convenient and safe.

3. There is a pressure-holding delay function at the bottom dead center to ensure the accuracy of the workpiece.

4. Under the relevant national standard conditions, the bending angle accuracy can reach ±45´. (Quoted standard JB/T22572-2011)

5. With the function of slow descent control, the operator can better control the workpiece.

E21 NC Hydraulic system

1. The hydraulic system (Germany Bosch Rexroth) can realize the slide block’s rapid decline, slow decline, working speed bending,

rapid return, and upward and downward motions such as sudden stop of the slide block.

2. The oil pump adopts a (USA SUNNY) gear pump, which can withstand high pressure and low noise.

3. The oil pipeline uses a combination of German ferrule joints and galvanized cold-drawn pipes, eliminating the need to replace the sealing ring to overcome oil leakage.

4. The sealing ring is selected from Japan’s NOK company, which has good sealing performance, reliable work, and long life.

5. The machine tool can work continuously under rated load, the hydraulic system has no leakage, and is continuously stable, with high precision.

125T NC Bending Machine

125T NC Bending Machine Main features

The whole welded machine structure achieves high rigidity; the machine is designed by ANSYS software which can ensure the reliability and precision of

the press brake.

The motors for Back-gauge and ram stroke are controlled by an inverter, which can achieve a high positioning accuracy of the

Back-gauge and ram by changing the frequency and voltage of the motor.

The X-axis (Back-gauge) and Y-axis (Ram stroke or cylinder stroke) can be programmed by the controller, which can make the bending job easy.

The side and rear metal safety guard meet the European safety standards.

Hydraulic overload can be protected by an overflow valve, System pressure can be regulated by a pressure switch easily.

A footswitch with an emergency button can stop the machine immediately when an accident happens.

PRESS BRAKE

125T NC Bending Machine safety standard and optional configuration

EN 12622:2009+A1:2013/ EN ISO 12100:2010 / EN 60204-1:2006+A1:2009
Open door power off the device (inclusive)
South Korean KACON footswitch(inclusive)
Side and rear metal safe fences(inclusive)
Photoelectric protection (optional)
Hydraulic overload protection(inclusive) 125T NC Bending Machine

sheet metal bending

 

 

Opinie (10)
5
Recenzje 10
10
0
0
0
0

10 opinii dla 125T NC Bending Machine E21 3200mm

Wyczyść filtry
  1. Siyabonga Mbatha

    This press brake offers a ton of features that I was looking for and it is also affordable.

  2. Gleice Cruz

    I am so happy with my purchase and I couldn’t be happier with the customer service team.

  3. Edi Ferreira

    This is a great press brake machine for anybody looking to bend metal sheets.

  4. Michael Gomxob

    The bending machine is easy to use and the results are consistent.

  5. Rayan Chiekhe

    I am pleased with this tool and am sure anyone looking to bend sheet metal would be too.

  6. Ibrahim Hajji

    I’m really impressed with this press brake. It is perfect for my business.

  7. Gagi Gidey

    I love how easy it is to operate and it cuts my production time in half.

  8. Alassan Abdoul Aziz

    The machine works quickly and gives me professional results every time.

  9. Luis Jht

    The press brake gave me a lot of value for my money. This is a tool that every metal fabricator needs to have.

  10. Naoufel Mlayah

    I’ve heard great things about this press brake, but I have yet to try it.

Dodaj opinię

Twój adres e-mail nie zostanie opublikowany. Wymagane pola są oznaczone *

About HARSLE

Why Choose HARSLE?

HARSLE is a professional metalworking machine manufacturer in China for many years, our productions have been sold to over 100 countries in the world!

1625509 1

Factory Direct

HARSLE Factory will offer best price without any middlemen make the price difference.

3306056 1

3-Year Warranty

HARSLE will offer 3-year warranty for all customers after receiving the machines.

1179499 1

7*24 Service

HARSLE customer service team will provide 7*24 online service via phone or Internet.