125T3200 NC Press Brake Machine E21

(10 opinii klienta)

Waga 950 kg
Wymiary 3200 × 2000 × 2500 mm
Capacity

125T

Bending Length

3200mm

Backgauge Axis

X

Controller

E21

Brand

HARSLE

Price Term

EXW

Lead Time

30 Days

Payment Method

LC

,

T/T

Warranty

Three Years

10 w magazynie

78 Ludzie oglądają teraz ten produkt!
Opis

125T3200 NC Press Brake has high labor productivity and high working accuracy for bending metal sheets.

125T3200 NC Press Brake adopts different shapes of upper and lower molds and can be bent into various shapes of workpieces.

The 63T NC Press Brake can bend the sheet once by one stroke of the slider. , After many times of bending,

the workpiece with a more complicated shape can be obtained.

When equipped with corresponding equipment, it can also be used for punching.

Working slide structure

1. The machine adopts hydraulic and electrical control, the stroke of the slider can adjust arbitrarily and has the action specifications of inching,

semi-automatic, automatic, etc., and the inching specification can use for easy mold trial and adjustment.

2. The design of the upper-moving bending machine, the two cylinders work at the same time, the operation balance, convenient and safe.

3. There is a pressure-holding delay function at the bottom dead center to ensure the accuracy of the workpiece.

4. Under the relevant national standard conditions, the bending angle accuracy can reach ±45´. (Quoted standard JB/T22572-2011)

5. With the function of slow descent control, the operator can better control the workpiece.

E21 NC Hydraulic system

1. The hydraulic system (Germany Bosch Rexroth) can realize the slide block’s rapid decline, slow decline, working speed bending,

rapid return, and upward and downward motions such as sudden stop of the slide block.

2. The oil pump adopts a (USA SUNNY) gear pump, which can withstand high pressure and low noise.

3. The oil pipeline uses a combination of German ferrule joints and galvanized cold-drawn pipes, eliminating the need to replace the sealing ring to overcome oil leakage.

4. The sealing ring is selected from Japan’s NOK company, which has good sealing performance, reliable work, and long life.

5. The machine tool can work continuously under rated load, the hydraulic system has no leakage, and is continuously stable, with high precision.

125T3200 NC Press Brake

125T3200 NC Press Brake Main features

The whole welded machine structure achieves high rigidity; the machine is designed by ANSYS software which can ensure the reliability

and precision of the press brake.

The motors for Back-gauge and ram stroke are controlled by an inverter, which can achieve a high positioning accuracy of the

Back-gauge and ram by changing the frequency and voltage of the motor.

The X-axis (Back-gauge) and Y-axis (Ram stroke or cylinder stroke) can be programmed by the controller, which can make the bending job easy.

The side and rear metal safety guard meet the European safety standards.

Hydraulic overload can be protected by an overflow valve, System pressure can be regulated by a pressure switch easily.

A footswitch with an emergency button can stop the machine immediately when an accident happens.

125t3200 nc press brake

125T3200 NC Press Brake safety standard and optional configuration

EN 12622:2009+A1:2013/ EN ISO 12100:2010 / EN 60204-1:2006+A1:2009
Open door power off the device (inclusive)
South Korean KACON footswitch(inclusive)
Side and rear metal safe fences(inclusive)
Photoelectric protection (optional)
Hydraulic overload protection(inclusive) 125T3200 NC Press Brake

sheet metal bending

 

 

Opinie (10)
5
Recenzje 10
10
0
0
0
0

10 opinii dla 125T3200 NC Press Brake Machine E21

Wyczyść filtry
  1. Vernon Tamuka Kandawasvika

    I would highly recommend this press brake for anyone looking for a good tool at a great price.

  2. Moulay omar slimane

    125ton press brake is a great product which has helped me out a lot.

  3. Allan Kruger

    The product is sturdy and easy to use. It can bend any metal without any problems.

  4. Ngwenya Romeo Jabulani

    I’m in love with this press brake. It is one of the best tools I have purchased.

  5. Geolor Djeumeni

    This press brake is easy to use and is affordable.

  6. tanadet Rittaroj

    I love that the durability of this press brake is unmatched.

  7. Hannes Beeslaar

    I feel like I got my money’s worth, and it saves me a lot of time and money in the long run.

  8. Thami Mogoera

    I use this press brake to press my metal sheets into shape.

  9. Andre Gross

    I love that it is so easy to use.

  10. Jvtt Mokoena

    This tool also earns me more money because I can make more parts per hour.

Dodaj opinię

Twój adres e-mail nie zostanie opublikowany. Wymagane pola są oznaczone *

About HARSLE

Why Choose HARSLE?

HARSLE is a professional metalworking machine manufacturer in China for many years, our productions have been sold to over 100 countries in the world!

1625509 1

Factory Direct

HARSLE Factory will offer best price without any middlemen make the price difference.

3306056 1

3-Year Warranty

HARSLE will offer 3-year warranty for all customers after receiving the machines.

1179499 1

7*24 Service

HARSLE customer service team will provide 7*24 online service via phone or Internet.