2500mm Hydraulic Press Brake For Sale
Waga | 950 kg |
---|---|
Wymiary | 3200 × 2000 × 2500 mm |
Capacity |
63T |
Bending Length |
2500mm |
Backgauge Axis |
X |
Controller |
HS-15T |
Brand |
HARSLE |
Price Term |
EXW |
Lead Time |
30 Days |
Payment Method |
LC ,T/T |
Warranty |
Three Years |
10 w magazynie
2500mm Hydraulic Press Brake has high labor productivity and high working accuracy for bending metal sheets.
It adopts different shapes of upper and lower molds and can be bent into various shapes of workpieces.
2500mm Hydraulic Press Brake can bend sheet once by one stroke of the slider. , After many times of bending,
the workpiece with a more complicated shape can be obtained.
When equipped with corresponding equipment, it can also be used for punching.
2500mm Hydraulic Press Brake Working slide structure
1. The machine adopts hydraulic and electrical control, the stroke of the slider can adjust arbitrarily and has the action specifications of inching,
semi-automatic, automatic, etc., and the inching specification can use for easy mold trial and adjustment.
2. The design of the upper-moving bending machine, the two cylinders work at the same time, the operation balance, convenient and safe.
3. There is a pressure-holding delay function at the bottom dead center to ensure the accuracy of the workpiece.
4. Under the relevant national standard conditions, the bending angle accuracy can reach ±45´. (Quoted standard JB/T22572-2011)
5. With the function of slow descent control, the operator can better control the workpiece.
2500mm Hydraulic Press Brake Hydraulic system
1. The hydraulic system (Germany Bosch Rexroth) can realize the slide block’s rapid decline, slow decline, working speed bending, rapid return,
and upward and downward motions such as sudden stop of the slide block.
2. The oil pump adopts a (USA SUNNY) gear pump, which can withstand high pressure and low noise.
3. The oil pipeline uses a combination of German ferrule joints and galvanized cold-drawn pipes, eliminating the need to replace the sealing ring to overcome oil leakage.
4. The sealing ring is selected from Japan’s NOK company, which has good sealing performance, reliable work, and long life.
5. The machine tool can work continuously under rated load, the hydraulic system has no leakage, and is continuously stable, with high precision.
2500mm Hydraulic Press Brake Main features
The whole welded machine structure achieves high rigidity; the machine designed by ANSYS software can ensure the reliability and precision of the press brake.
The motors for Back-gauge and ram stroke are controlled by an inverter, which can achieve a high positioning accuracy of the
Back-gauge and ram by changing the frequency and voltage of the motor.
The X-axis (Back-gauge) and Y-axis (Ram stroke or cylinder stroke) can be programmed by the controller, which can make the bending job easy.
The side and rear metal safety guard meet the European safety standard.
Hydraulic overload can be protected by an overflow valve, System pressure can be regulated by a pressure switch easily.
A footswitch with an emergency button can stop the machine immediately when an accident happens.
2500mm Hydraulic Press Brake safety standard
EN 12622:2009+A1:2013/ EN ISO 12100:2010 / EN 60204-1:2006+A1:2009
Open door power off the device (inclusive)
South Korean KACON footswitch(inclusive)
Side and rear metal safe fences(inclusive)
Photoelectric protection (optional)
Hydraulic overload protection(inclusive)
2500mm Hydraulic Press Brake HS-15T Controller
10 opinii dla 2500mm Hydraulic Press Brake For Sale
Wyczyść filtryWhy Choose HARSLE?
HARSLE is a professional metalworking machine manufacturer in China for many years, our productions have been sold to over 100 countries in the world!
Maximiliano Yordan –
I highly recommend the press brake machine for any metal fabrication company looking to improve its performance.
Andre Pietersen –
This machine has helped us save time and increase our productivity without sacrificing quality.
Punsara Aravinda –
The press brake machine is a game-changer when it comes to metalworking.
Morwapula Seane –
This machine is so versatile and can create a range of geometric shapes that would be difficult to produce by hand.
Mpata lukunga jeremie –
I love how this machine has helped me to save time and energy in my metalworking projects.
Francis Ndungu –
The machine is easy to use and has a variety of adjustable features, allowing me to customize the machine to my specific needs.
Jose Cassio Natalino –
The finished products have always been precise and clean. I highly recommend this press brake machine for anyone looking to take their metalworking projects to the next level.
Okal Geoerge –
I recently purchased a press brake machine and have found it to be an incredibly useful tool in my metalworking projects.
Davies Malama –
The machine effortlessly bends metal sheets into a variety of geometric shapes with precision, which has saved me countless hours of manual labor.
Toussaint Kalumuna –
The construction of the machine is sturdy, and the design is user-friendly, allowing for easy operation.