160T Sheet Metal Bending Machine
| Weight | 950 kg |
|---|---|
| Dimensions | 3200 × 2000 × 2500 mm |
| Capacity |
160T |
| Bending Length |
2500mm |
| Backgauge Axis |
X |
| Controller |
HS-15T |
| Brand |
HARSLE |
| Price Term |
EXW |
| Lead Time |
30 Days |
| Payment Method |
LC ,T/T |
| Warranty |
Three Years |
10 in stock
160T Sheet Metal Bending Machine has high labor productivity and high working accuracy for bending metal sheets.
It adopts different shapes of upper and lower molds and can be bent into various shapes of workpieces.
NC 160T Sheet Metal Bending Machine can bend sheets once by one stroke of the slider. , After many times of bending, a workpiece with a more complicated shape can be obtained.
When equipped with corresponding equipment, it can also be used for punching. 160T Sheet Metal Bending Machine
160T Sheet Metal Bending Machine Working slide structure
1. The machine adopts hydraulic and electrical control, the stroke of the slider can adjust arbitrarily and has the action specifications of inching, semi-automatic, automatic, etc., and the inching specification can use for easy mold trial and adjustment.
2. The design of the upper-moving bending machine, the two cylinders work at the same time, the operation balance, convenient and safe.
3. There is a pressure-holding delay function at the bottom dead center to ensure the accuracy of the workpiece.
4. Under the relevant national standard conditions, the bending angle accuracy can reach ±45´. (Quoted standard JB/T22572-2011)
5. With the function of slow descent control, the operator can better control the workpiece.
160T Sheet Metal Bending Machine Hydraulic system
1. The hydraulic system (Germany Bosch Rexroth) can realize the slide block’s rapid decline, slow decline, working speed bending, rapid return, and upward and downward motions such as sudden stop of the slide block.
2. The oil pump adopts a (USA SUNNY) gear pump, which can withstand high pressure and low noise.
3. The oil pipeline uses a combination of German ferrule joints and galvanized cold-drawn pipes, eliminating the need to replace the sealing ring to overcome oil leakage. 160T Sheet Metal Bending Machine
4. The sealing ring is selected from Japan’s NOK company, which has good sealing performance, reliable work, and long life.
5. The machine tool can work continuously under rated load, the hydraulic system has no leakage, and is continuously stable, with high precision.
160T Sheet Metal Bending Machine Main features
The whole welded machine structure achieves high rigidity; the machine designed by ANSYS software can ensure the reliability and precision of the press brake.
The motors for Back-gauge and ram stroke are controlled by an inverter, which can achieve a high positioning accuracy of the Back-gauge and ram by changing the frequency and voltage of the motor.
The X-axis (Back-gauge) and Y-axis (Ram stroke or cylinder stroke) can be programmed by the controller, which can make the bending job easy.
The side and rear metal safety guard meet the European safety standard.
Hydraulic overload can be protected by an overflow valve, System pressure can be regulated by a pressure switch easily.
A footswitch with an emergency button can stop the machine immediately when an accident happens.
160T Sheet Metal Bending Machine safety standard
EN 12622:2009+A1:2013/ EN ISO 12100:2010 / EN 60204-1:2006+A1:2009
Open door power off the device (inclusive)
South Korean KACON footswitch(inclusive)
Side and rear metal safe fences(inclusive)
Photoelectric protection (optional)
Hydraulic overload protection(inclusive)
HS-15T Controller
10 reviews for 160T Sheet Metal Bending Machine
Clear filtersWhy Choose HARSLE?
HARSLE is a professional metalworking machine manufacturer in China for many years, our productions have been sold to over 100 countries in the world!
Andre Venter –
I recently purchased a press brake machine and it has been a game-changer for my metalworking business.
Ivan Freire –
This bending machine makes it easy to bend metal sheets into a variety of shapes and cross-sections.
Hennie Louw –
I was initially worried that this machine would be difficult to use, but it turned out to be very user-friendly.
Abdi Fatah Mohamed Salad –
The press brake machine has an easy-to-use interface and the software makes it simple to create complex shapes.
hamri hakim el hachemi –
I’m very satisfied with this product and would recommend it to anyone in metalworking who needs to bend sheet metal into different shapes.
Wagner Fabro –
I recently purchased a press brake machine to use in my metalworking shop and I’m thrilled with the results.
Joaquim Jacinto –
The bending machine is easy to use and efficient, making it the perfect tool for bending metal sheets into a variety of shapes.
Sabo Aputan –
I was able to create complex geometric cross-section shapes with precision and accuracy, saving me time and money in the process.
Esperant Kibambe Ngoie –
The press brake machine is also durable and built to last, which is essential in my line of work.
Achref Bouallegue –
I highly recommend this press brake machine for any metalworking professional or hobbyist looking to take their craft to the next level.