100T NC Press Prake Machine for TP10S Bending
$7,000 Le prix initial était : $7,000.$5,000Le prix actuel est : $5,000.
Poids | 950 kg |
---|---|
Dimensions | 3200 × 2000 × 2500 millimètre |
Capacity |
100T |
Bending Length |
3200mm |
Backgauge Axis |
X |
Controller |
TP10S |
Brand |
HARSLE |
Price Term |
EXW |
Lead Time |
30 Days |
Payment Method |
LC ,T/T |
Warranty |
Three Years |
10 en stock
WC67K-100T/3200 TP10S Press Brake Parameter
Standard Configuration
|
Item | Unit | Value |
Capacity | KN | 1000 |
Bending Length | mm | 3200 |
Opening Height | mm | 320 |
Cylinder Stroke | mm | 120 |
Throat Depth | mm | 320 |
Machine Power | KW | 7.5 |
Machine weight | KG | 6000 |
Machine Dimension | mm | 2600*1600*2400 |
100T NC Press Prake machine has high labor productivity and high working accuracy for bending metal sheets.
It adopts different shapes of upper and lower molds and can be bent into various shapes of workpieces.
TP10S 100T NC Press Prake machine can bend sheet once by one stroke of the slider. , After many times of bending, the workpiece with a more complicated shape can be obtained.
When equipped with corresponding equipment, it can also be used for punching.
100T NC Press Prake Working slide structure
1. The machine adopts hydraulic and electrical control, the stroke of the slider can adjust arbitrarily and has the action specifications of inching, semi-automatic, automatic, etc., and the inching specification can use for easy mold trial and adjustment.
2. The design of the upper-moving bending machine, the two cylinders work at the same time, the operation balance, convenient and safe.
3. There is a pressure-holding delay function at the bottom dead center to ensure the accuracy of the workpiece.
4. Under the relevant national standard conditions, the bending angle accuracy can reach ±45´. (Quoted standard JB/T22572-2011)
5. With the function of slow descent control, the operator can better control the workpiece.
100T NC Press Prake Hydraulic system
1. The hydraulic system (Germany Bosch Rexroth) can realize the slide block’s rapid decline, slow decline, working speed bending, rapid return, and upward and downward motions such as sudden stop of the slide block.
2. The oil pump adopts a (USA SUNNY) gear pump, which can withstand high pressure and low noise.
3. The oil pipeline uses a combination of German ferrule joints and galvanized cold-drawn pipes, eliminating the need to replace the sealing ring to overcome oil leakage.
4. The sealing ring is selected from Japan’s NOK company, which has good sealing performance, reliable work, and long life.
5. The machine tool can work continuously under rated load, the hydraulic system has no leakage, and is continuously stable, with high precision.
100T NC Press Prake Main features
The whole welded machine structure achieves high rigidity; the machine design by ANSYS software can ensure the reliability and precision of the press brake.
The motors for Back-gauge and ram stroke are controlled by an inverter, which can achieve a high positioning accuracy of the Back-gauge and ram by changing the frequency and voltage of the motor.
The X-axis (Back-gauge) and Y-axis (Ram stroke or cylinder stroke) can be programmed by the controller, which can make the bending job easy.
The side and rear metal safety guard meet the European safety standards.
Hydraulic overload can be protected by an overflow valve, System pressure can be regulated by a pressure switch easily.
A footswitch with an emergency button can stop the machine immediately when an accident happens.
100T NC Press Prake safety standard
EN 12622:2009+A1:2013/ EN ISO 12100:2010 / EN 60204-1:2006+A1:2009
Open door power off the device (inclusive)
South Korean KACON footswitch(inclusive)
Side and rear metal safe fences(inclusive)
Photoelectric protection (optional)
Hydraulic overload protection(inclusive)
100T NC Press Prake optional configuration
100T NC Press Prake TP10 Controller
11 avis pour 100T NC Press Prake Machine for TP10S Bending
Vue grille %sWhy Choose HARSLE?
HARSLE is a professional metalworking machine manufacturer in China for many years, our productions have been sold to over 100 countries in the world!
Jordan –
The price is so competitive, could you please send the PI to me by email?
Mayo –
Thanks for your offer, please check your email. i just sent the PI to you by email.
Jagema Hora –
If you are looking for a powerful and precise metal bending machine, then the CNC bending machine is a top choice.
Alhassan Ahmad Doguwa –
This machine can bend metal with impeccable accuracy and speed, making it ideal for both small and large-scale metalworking projects.
ntombikayise Mokoena –
I recently purchased the CNC press brake for my sheet metal workshop and can’t believe how much easier it has made my work. The precision and accuracy are impressive and the machine is very easy to operate.
Baiysh Kazakbaev –
I am now able to complete my projects much faster and with fewer errors. The build quality is exceptional, and the machine is clearly built to last. It is a must-have for any workshop that is looking to improve their productivity and quality of work.
Mohammed. Irfan –
I purchased the CNC press brake for sheet metal and I couldn’t be happier with my decision.
Kenny –
It has been an excellent addition to my workshop, allowing me to accurately and efficiently bend sheet metal.
Klegbo Gaudens –
The machine is well-built and durable, made with high-quality materials that ensure it will last for years to come.
Franco Cerda –
The CNC feature is also a huge time-saver, allowing me to program the machine to bend my sheets precisely, with minimal room for human error.
Younoussa Hassani Athoumani –
I would recommend this press brake to anyone looking for a reliable and efficient machine that delivers consistent, precise results every time.
Chosen Mbewe –
It’s a game-changer when it comes to sheet metal fabrication.