125T NC Press Brake has high labor productivity and high working accuracy for bending metal sheets.
125T NC Press Brake adopts different shapes of upper and lower molds and can be bent into various shapes of workpieces.
The 63T NC Press Brake can bend the sheet once by one stroke of the slider. , After many times of bending,
the workpiece with a more complicated shape can be obtained.
When equipped with corresponding equipment, it can also be used for punching.
Working slide structure
1. The machine adopts hydraulic and electrical control, the stroke of the slider can adjust arbitrarily and has the action specifications of inching,
semi-automatic, automatic, etc., and the inching specification can use for easy mold trial and adjustment.
2. The design of the upper-moving bending machine, the two cylinders work at the same time, the operation balance, convenient and safe.
3. There is a pressure-holding delay function at the bottom dead center to ensure the accuracy of the workpiece.
4. Under the relevant national standard conditions, the bending angle accuracy can reach ±45´. (Quoted standard JB/T22572-2011)
5. With the function of slow descent control, the operator can better control the workpiece.
E21 NC Hydraulic system
1. The hydraulic system (Germany Bosch Rexroth) can realize the slide block’s rapid decline, slow decline, working speed bending,
rapid return, and upward and downward motions such as sudden stop of the slide block.
2. The oil pump adopts a (USA SUNNY) gear pump, which can withstand high pressure and low noise.
3. The oil pipeline uses a combination of German ferrule joints and galvanized cold-drawn pipes, eliminating the need to replace the sealing ring to overcome oil leakage.
4. The sealing ring is selected from Japan’s NOK company, which has good sealing performance, reliable work, and long life.
5. The machine tool can work continuously under rated load, the hydraulic system has no leakage, and is continuously stable, with high precision.
125T NC Press Brake Main features
The whole welded machine structure achieves high rigidity; the machine is designed by ANSYS software which can ensure the
reliability and precision of the press brake.
The motors for Back-gauge and ram stroke are controlled by an inverter, which can achieve a high positioning accuracy of the
Back-gauge and ram by changing the frequency and voltage of the motor.
The X-axis (Back-gauge) and Y-axis (Ram stroke or cylinder stroke) can be programmed by the controller, which can make the bending job easy.
The side and rear metal safety guard meet the European safety standards.
Hydraulic overload can be protected by an overflow valve, System pressure can be regulated by a pressure switch easily.
A footswitch with an emergency button can stop the machine immediately when an accident happens.
125T NC Press Brake safety standard and optional configuration
EN 12622:2009+A1:2013/ EN ISO 12100:2010 / EN 60204-1:2006+A1:2009
Open door power off the device (inclusive)
South Korean KACON footswitch(inclusive)
Side and rear metal safe fences(inclusive)
Photoelectric protection (optional)
Hydraulic overload protection(inclusive) 125T NC Press Brake
Omran Khalil –
I like that this press brake is available at a good price, and it has a fast delivery time.
Albert Korkor Rogers –
I like the press brake. this press brake is perfect.
Olcay Fidan –
I love my press brake because it makes creating intricate shapes easily.
Mbine Andriamanjato –
It is a lot of fun to use and makes it easy to put together a variety of different parts. The press brake is easy to use and the instructions are clear.
Lucas Martin Lo Tuso –
I love that I can use the press brake to make all types of things and I have learned so much about the different ways to use it.
Asamoah Prince –
I highly recommend this press brake to anyone who is looking to create and experiment with different shapes.
Rudi de Winnaar –
I like that it is so easy to use, and I like that the machine itself is so sturdy.
Qudratullah Berml Bandari –
There is no need to worry about the machine breaking down when I’m using it.
Gradus Van Der Merwe –
A press brake is an essential machine for any metalworking shop.
Leon Ashad Bell –
This press brake is a great tool for any fabricator or metal worker. It is very sturdy and easy to operate.