NC 125T Press Brake Metal Working Tools TP10S Bending Machine
Peso | 950 kg |
---|---|
Dimensioni | 3200 × 2000 × 2500 mm |
Capacity |
125T |
Bending Length |
2000mm |
Backgauge Axis |
X+R |
Controller |
HS-15T |
Brand |
HARSLE |
Price Term |
EXW |
Lead Time |
30 Days |
Payment Method |
LC ,T/T |
Warranty |
Three Years |
10 disponibili
NC 125T Press Brake has high labor productivity and high working accuracy for bending metal sheets.
It adopts different shapes of upper and lower molds, and can be bent into various shapes of workpieces.
NC 125T Press Brake can bend sheet once by one stroke of the slider. After many times of bending,
the workpiece with more complicated shape can be obtained.
When equipped with corresponding equipment, it can also be used for punching.
NC 125T Press Brake Working slide structure
1. The machine adopts hydraulic and electrical control, the stroke of the slider can adjust arbitrarily and has the action specifications of inching,
semi-automatic, automatic, etc, and the inching specification can use for easy mold trial and adjustment.
2. The design of the upper-moving bending machine, the two cylinders work at the same time, the operation balance, convenient and safe.
3. There is a pressure-holding delay function at the bottom dead center to ensure the accuracy of the workpiece.
4. Under the relevant national standard conditions, the bending angle accuracy can reach ±45´. (Quoted standard JB/T22572-2011)
5. With the function of slow descent control, the operator can better control the workpiece.
NC 125T Press Brake Hydraulic system
1. The hydraulic system (Germany Bosch Rexroth) can realize the slide block rapid decline, slow decline,
working speed bending, rapid return and upward and downward motions such as sudden stop of the slide block.
2. The oil pump adopts (USA SUNNY) gear pump, which can withstand high pressure and low noise.
3. The oil pipeline uses a combination of German ferrule joints and galvanized cold-drawn pipes,
eliminating the need to replace the sealing ring to overcome oil leakage.
4. The sealing ring is selected from Japan’s NOK company, which has good sealing performance, reliable work and long life.
5. The machine tool can work continuously under rated load, the hydraulic system has no leakage and is continuously stable, with high precision.
NC 125T Press Brake Main features
The whole welded machine structure achieves high rigidity; the machine design by ANSYS software which can ensure the
reliability and precision of the press brake.
The motors for Back-gauge and ram stroke are controlled by inverter, which can achieve high positioning accuracy of the
Back-gauge and ram by changing the frequency and voltage of motor.
X axis (Back-gauge) and Y axis (Ram stroke or cylinder stroke) can be programmed by the controller, which can make the bending job easy.
Side and rear metal safety guard meets European safety standard.
Hydraulic overload can be protected by overflow valve, System pressure can be regulated by pressure switch easily.
Foot switch with emergency button can stop the machine immediately when accident happens.
NC 125T Press Brake safety standard
EN 12622:2009+A1:2013/ EN ISO 12100:2010 / EN 60204-1:2006+A1:2009
Open door power off device (inclusive)
South Korean KACON foot switch (inclusive)
Side and rear metal safe fences (inclusive)
Photoelectric protection (optional) NC 125T Press Brake
Hydraulic overload protection (inclusive)
NC 125T Press Brake HS-15T Controller
10 recensioni per NC 125T Press Brake Metal Working Tools TP10S Bending Machine
Collegamento sociale YouTubeWhy Choose HARSLE?
HARSLE is a professional metalworking machine manufacturer in China for many years, our productions have been sold to over 100 countries in the world!
Ahmet Turgut –
The machine is easy to set up and use, and I love how precise the bends are.
Sanmak Kavusanlar –
It is incredibly versatile and allows me to bend metal sheets into a variety of shapes with ease.
Sinh Bao An –
The press brake machine has been a game changer in my metalworking business.
Naif Ahmed –
The press brake machine has been a game changer for my metalworking business.
Salvador Castro Tomay –
This machine has the ability to bend metal sheets into a variety of shapes with precision and accuracy.
Daniel Galvez –
It has drastically increased our productivity and efficiency.
Noe Fernandez –
The quality of the bends is excellent, and the machine is user-friendly, making it easy for our team to learn how to use it.
Ibrahim Muhammed Tosho –
The bending machine is very durable and built to last, which is important in a busy fabrication shop like mine.
El Ehlou Mustapha –
We have been able to create a wide range of geometric cross-section shapes with ease, which has opened up new possibilities for our work.
Marcelo Miyata –
I highly recommend the press brake machine to anyone who works with metal sheets.